| Máquina |
Descripción |
Inicio de Puja |
|
- Fanuc CNC - Located in ILLINOIS
- With C-Axis, Live Tooling, Sub-Spindle
- Equipped With Bar Feeder, High Res Encoders for all Axis
|
$ 16,500.00
Reserve not met |
|
- 2007 - CNC - Located in CALIFORNIA
- LESS than 100 hours approx. - 30 Ton Capacity
- 774 mm. table length
|
$ 21,450.00
Reserve not met |
|
- Located in PENNSYLVANIA
- Equipped with MAH21 Backgauge
- 100 Inches Wide Machine with .24" Capacity
|
$ 23,000.00
Reserve not met |
|
- Operatuer 8 Axis Backgauge
- 3 Program Modes; Depth, Angle And 3-D Graphic Angle
- Built In Crowning
|
$ 16,445.00
Reserve not met |
|
- 100 AMP Thermal Dynamic Plasma Torch - Located in CALIFORNIA
- 2008 - 6 - 300"/Minute - w/ Available Manuals
- Exhaust System and Manuals
|
$ 7,800.00
Reserve not met |
|
- 2007 - Fanuc CNC - Located in ILLINOIS
- CAT 40 Spindle Taper - 8,000RPM Spindle Speed - 24 ATC
- 50" x 20" x 24" Travels
|
$ 23,000.00
Reserve not met |
|
- Yasnac CNC - Located in IDAHO
- Materials Ran: Aluminum, Plastic and Stainless Steel
- Expandable Memory (2GB), 8,000 RPM, 20 ATC
|
$ 9,800.00
Reserve not met |
|
- Centurion 6 CNC - Located in WISCONSIN
- 35" x 16" Table - CAT 40 - 6000 RPM - 20 ATC
- Hard Drive, Linear Guideways, Coolant Tank & Pump
|
$ 5,700.00
Reserve not met |
|
- Located in Michigan
- ATC Capacity: 24 Arm Type
- Spindle Speed: 60 - 6,000 RPM
|
$ 5,200.00
Reserve not met |
|
- 2004 - CNC - Located in OHIO
- Materials Ran: Aluminum
- Work Area Size: 23.6" x 11.8"
|
$ 11,000.00
Reserve not met |
|
- EZ Path CNC
- 4,000 RPM - 17" Swing - 40" Max Center Distance
- Located in FLORIDA
|
$ 8,000.00
Reserve not met |
|
- EZ Track CNC - Located in FLORIDA
- 9" x 48" Table Size
- 60 - 4200 RPM Spindle Speed
|
$ 7,350.00
Reserve not met |
|
- Located in WISCONSIN - Spindle Motor: 5 HP
- Equipped with:Work Table
- 5 HP High Frequency Spindle
|
$ 3,575.00
Reserve not met |
|
- Accramatic 950 CNC - Located in WASHINGTON
- 10,000RPM - 24.8" Pallets - CAT 50
- 80 Tool Stations
|
$ 12,725.00
Reserve not met |
|
- OSP 700M Control - Located in WISCONSIN
- Table size: 40" x 20"
- Tool Changer Style: Side Mount Twin Arm
|
$ 8,000.00
Reserve not met |
|
- Fanuc 16i-M Control - Located in WISCONSIN
- Tool Changer Capacity: 30 Tool
- Table Size: 55.11" x 22.4" - Maximum Table Load: 2200 lbs.
|
$ 9,800.00
Reserve met |